Buy Coats 950 Balancer & 5060A Tire Changer with Warranty in Hamersville, Ohio, US, for US $4,498.00

COATS MODEL 5060-A
TIRE CHANGER

&

COATS MODEL 950 / 1000
TIRE BALANCER

COATS 5060A
RIM CLAMP TIRE CHANGER

Built to Make Changing Low Profiles, Run flats, and other Tough Tires Fast and Easy

All Machines Come With A Buyer’s Protection 1 Year Parts Warranty

With Full Technical Support

What Makes Us Different Is Our Process

Our Machines Are More Than A Quick Paint Job

True Rebuilds Require The Following

Completely Rebuilt By Factory Trained Technicians with previous Coats Service Partner experience
Each machine is completely disassembled down to the frame.
Each Frame is stripped, primed and repainted with original factory paint.
Swing Arm to Column Bushings are replaced.
Transmission Disassembled (See Pictures)
All components cleaned - NEW Seals - O rings - Bearings are replaced.
Gears are checked and replaced as needed to meet original factory specs.
Case refilled with NEW oil and checked for proper operation.
All E and EX Models come with NEW Turntable Drive Motor - Wiring Harness - Forward Reverse Switch.
All Air Motors are disassembled - Cleaned - NEW Vanes - Bearings - Seals replaced and repainted.
One-way Flow Valves Reassembled - Torque and PSI settings tested to original factory specs.
NEW 4-way Valves replaced to provide function of the Table Rotation - Bead Breaker System - Table Clamp Movement.
Table disassembled - all moving parts readjusted and lubricated. We reset Carriers and Jaws.
Table - Bead Breaker - B/L Cylinder are cleaned and repainted. Plungers and Seals replaced.
Replace Cylinder Sleeve as needed. We reassemble and test to factory PSI settings.
Replaced with all NEW - Hoses - Hard Lines – Bolts - Bead Breaker Button - Actuator Valve - Machine Oil -Regulator - Tire Inflator Whip Hose - Bottle and Brush.
Table clamps are to Factory Specs.
NEW Removable plastic covers for protecting Rims on each clamp.
Gauges tested and replaced with new as needed.
Pressure Limiter Assembly disassembled and all O Rings and Diaphragms Replaced.
Pedal Assembly disassembled, cleaned, checked for wear and adjusted and repainted.
After the Tire Changer has been reassembled it is tested thoroughly by changing tires multiple times to ensure proper functioning.
All factory labels are replaced with brand NEW Labels
Complete PDF copies of the Operator and Spare Parts manuals come with each machine
The machine is then stretch wrapped and banded to a pallet with steel strapping for safe shipping worldwide.
All Tire Changers come with buyers protection 1 Year Parts Warranty with full technical support

Specifications:

Rim Diameter	10" - 17.5" External; 13" - 20" Internal
Rim Width	14" Maximum
Tire Diameter	50" Maximum
Drive System	Air
Air Source (Air)	150 to 175 PSI, 5 HP compressor, 14 to 15 SCFM @ 150 PSI
Chassis Footprint	35"W x 44"D x 75"H
Shipping Weight	700 lbs.

Current Dealer Pricing: $5899.00
BUY NOW: $2499.00

Coats 950 / 1000
Wheel Balancer

A High Volume Solution

The Model 950 wheel balancer is recognized as the workhorse of the wheel service industry.

What Makes Us Different Is Our Process

Our Machines Are More Than A Quick Paint Job

True Rebuilds Require The Following

·        Balancer is completely disassembled down to the Frame.

·        Frame is stripped, primed and repainted with original factory paint.

·        Direct Drive Motor is disassembled and cleaned thoroughly and then repainted and tested.

·        Encoder is checked for proper function and replaced with NEW ones if needed.

·        Cooling Fan is cleaned and tested.

·        PCB Board is taken off the Control Panel and cleaned and tested with factory diagnostic equipment to meet load ratings.

·        Control Panel is cleaned and tested with Factory Diagnostic Equipment specific to this panel.

·        Motor Control Boards tested with Diagnostic Equipment.

·        Limit Switches are tested and replaced with NEW ones if needed.

·        ALL Plastic Trim – Hood – Tray – Shroud on Motor – Cone Holder – Screen Holder are cleaned and refinished.

·        Each Cone Set and Hub Nut that comes with the Balancer is sand blasted clean and checked for defects. Then tested to ensure they fit Balancer Shaft for accurate balancing.

·        Each hub is cleaned and relubricated.

·        After the Balancer is reassembled it is recalibrated and tested a minimum of 50 times with various size rims and tires to ensure the Motor Mount Piezos are reading true and the overall performance of the Balancer is ready for service.

·        All Factory Labels are replaced with Brand NEW Labels

·        Complete PDF copies of the Operator and Spare Parts Manuals come with each machine.

·        The Balancer is then stretch wrapped and banded to a pallet with steel strapping for safe shipping worldwide.

Balancers Come With a Buyer’s Protection Warranty

1 Year On Drive Motor and 90 Days On Remaining Major Components

With Full Technical Support

Key Features:

1 1/2 horsepower direct-drive motor and 16-bit microprocessor provide super-fast five second cycle times.
Eight separate balancing modes (static and dynamic modes, RV and four different alloy modes, plus match mount).
Convenient keypad entry.
Keyboard activated "hood start" saves time.
Ounce/gram conversion and a roundoff feature eliminates complicated calculations.
25-pocket weight tray provides abundant storage.
Self calibration.

Specifications:

Balancing Modes	5
Tire Diameter	Up to 40"
Rim Width	2" to 19.9"
Max. Tire Wt.	150 lbs.
Shaft Diameter	1-1/8" or 40mm
Shaft Length	6-5/8"
Resolution: Oz.	0.01
Resolution: Degrees	1.4
Accuracy: Oz.	0.01
Power Requirement	220v AC, 1-3 Phase
Footprint	57"W x 50"D
Shipping Weight	586 lbs.

NEW CURRENT DEALER PRICING - $4505.43

BUY NOW ONLY - $2499.00

Rebuild Service Available

for your Coats, Corghi, or John Bean Tire Equipment

(Please visit our store for more information)

Trade in your tire equipment for one of our completely rebuilt units...
We also purchase used tire equipment
We are the largest tire equipment rebuilder in the US

email or call for more detailed information

CALL FOR DISCOUNTS ON PURCHASES OF MULTIPLE MACHINES

-- $199.00 Shipping --

Shipping Cost for these items are to most locations in the US and Canada

Certain remote locations may require additional cost

Shipping costs includes delivery of your order to a business address
with a dock or other way to load or unload truck
Liftgate, Residential, and Limited Access Delivery require additional costs if needed for shipment.

ALL MAJOR CREDIT OR DEBIT CARDS ACCEPTED

CALL FOR PROCESSING

eMail with any questions you may have or

CALL (937) - 379 - 0200

9 am - 5 pm Eastern Time Monday - Friday

Yes we ship International
Additional shipping cost applies - Call for Quote

Please visit our store for more tire maintenance equipment

Click here to add us to your eBay favorites list.

Seller reserves the right to withdraw item from auction at anytime due to prior sale.

Volvo tests flywheel technology to cut fuel use

Tue, 31 May 2011

Volvo is testing flywheel technology--being used in Formula One racing to give cars an extra boost--as a technology that could help cut fuel use in future cars by as much as 20 percent. Flywheels recapture energy normally lost as heat during braking. That energy can then be used to help propel the car.

Jason Castriota to head Saab Design

Thu, 24 Jun 2010

When Car Design News spoke to Jason Castriota about the new design consultancy he had set up in New York and Turin back in March, the designer told us he was working on a very exciting automotive project that he couldn't talk about at the time. It turns out that automotive project was for Saab, as last week the Swedish automaker announced it had hired Jason Castriota Design to oversee the development of a new generation of Saab products – the first to be completed under the tenure of its new owners, Spyker. Castriota's new appointment marks the shift from Saab's former position – where the brand was an integrated company within GM – to its newfound placement as an independent automaker, with Castriota essentially filling the role previously occupied by Mark Adams, GM Europe's Vice President of Design.

Motorists Worry About Safety On The School Run

Fri, 29 Aug 2014

AS THE start of new school term approaches, the latest research from BCA, a leading vehicle remarketing company, reveals the pressures faced by parents - and other motorists - on school run routes. Both parents and non-parents were surveyed and with nearly half (45%) of non-parents saying they drive by schools or use the same route as parents dropping off their children, it's clear that school runs create some significant pinch-points. Key findings: 46% of all motorists believe parents drive their children to school because it takes too long to walk 30% of non-parents believe children demand to be driven to school, compared to just 17% of parents Over a third (38%) of all motorists think unreliable public transport prompts parents to drive children to school More than half (57%) of motorists see illegal parking outside of school gates 44% of have seen parents and children not looking at oncoming traffic when opening car doors Both parents and non-parents were most in favour of schools creating drop-off areas to tackle congestion and parking issues during the school run at 52% and 57% respectively 29% of parents think police officers should be on patrol to tackle parking issues during the school run Parents in Northern Ireland are most likely to drive their children to school, topping the list at 51%, followed by families in the North East and West Midlands at 39%.

Coats 950 Balancer & 5060a Tire Changer With Warranty on 2040-parts.com