Parker Push-Lok is the performance standard for a multitude of applications. It is manufactured to the same rigorous standards as all of Parker’s products. This hose performs well when used within the temperature and pressure parameters that it was designed for:

• 250 psi. maximum pressure for most oil, water and fuel applications.
• Temperature range –40° F to +212° F.

Synthetic rubber tube is covered with one layer of textile braid,combined with an outer layer of synthetic colored rubber. Sized in fractions and may be used with any push-on style fitting. Series 8000 Push Lite Race Hose Ends work well with this type of hose.

This is not the Chinese hose like many others sold on ebay that have not been rated for fuel. This is real Parker 8600/8700 hose.

For ordering information or questions on bulk orders or smaller order, please contact 423-847-5272 Joshua Manning

\/ \/ \/ \/ \/ Please Read, actual good info below  \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/

1. This ad is for 20FT no less, but can possibly get more included if the rest will be scrap.
2. This hose can be used for coolant, transmission fluid, fuel, air hose (250 psi max), about anything you can think of.
3. A big fuel question I get asked is about ethanol in these push lock hoses. We have run E85 and its been ran a couple of seasons and did not show signs of wear or break down. But its still not advised unless you have future plans to upgrade or change to a braided line.
4. This ad is for the Blue hose, but Black can be purchased if requested.
5. I can get fittings and add them to the order cheaper and better quality than any other fittings but they only come in Brass, so for under the hood i recommend the basic colored aluminum fittings. But for on tank and hidden hoses the brass fittings are top notch! can get 45, 90, straight, -6 to -8, any adapter size, trans fittings for transmission cooler lines. Just give me a size and I can have it sent to you.

Thanks and please call or text 423-847-5272 with any questions!