Find or Sell any Parts for Your Vehicle in USA

Kayak Canoe Anchor Chene Ch-10 Slip Ring With Line New Made In Usa on 2040-parts.com

US $34.95
Location:

Davison, Michigan, United States

Davison, Michigan, United States
Condition:New Type:Anchor Manufacturer Part Number:CH-10 Brand:Chene Country/Region of Manufacture:United States UPC:922296739290

Kayak Canoe Chene Slip Ring Anchor.  Includes 20 ft. of 1/4'' polypropylene yellow line.  Can also be used with paddle boats and jet skis

Exclusive Chene Anchor Features:

  • 100 percent Retrievable: The angle of the slip-ring shank allows the anchor to be 100 percent retrievable. It's the only anchor that can be retrieved straight up without the use of a seperate trip line
  • Requires 70% less anchor Line: The 45 degree holding position enables the anchor to perform best with a 2:1 ratio of anchor line to depth (unlike the 7:1 ratio recommended for other fluke style anchors)
  • No Anchor Chain Required
  • Easy to Store
  • Limited Lifetime Guarantee
  • Quick Penetration
  • Excellent Holding Power
  • Danforth Style Design
  • Excellent Value
  • Protective Finish
  • Exclusive Slip-ring design for 100% retrievability
  • Includes 20 ft. of 1/4'' polypropylene yellow line
  • Made in USA

  • Dimensions are as follows:
  • Length: 8  inches,
  • Width: 7 inches,
  • Length of Flukes: 6.25  inches,
  • Weight: 2 pounds.

Copyright Disclaimer: "Danforth" is a registered trademark of Tie Down Engineering. The term "Danforth" is used for general descriptive purposes to describe the style of this anchor. It is in no way used to imply that this anchor is affiliated with Tie Down Engineering in any way. All photos on this listing are property of Underwoods Auto & Marine LLC and are not to be used or copied in any way without the expressed permission of the owner.  

 

Frequently Asked Questions: Anchoring

 

What size anchor do I need?  The recommended boat size for each anchor is listed above. Anchors are tested under ‘’Average Conditions’’. If you frequently anchor in High Winds / Stormy conditions, Rough water / Swift Current,  Poor Bottom conditions, or if you have a High Profile boat we recommend using an anchor one size larger.

 

This anchor looks small for my boat and isn’t very heavy?  Danforth style anchors get their holding power from mechanical design. Therefore, it is not necessary for the anchor to be excessively large or heavy to work.

 

Do I need to use an Anchor Chain with this Anchor? It Is necessary to use an anchor chain with Danforth style anchors. The length of chain helps the anchor set by holding the anchor stock down. If used without a chain, Danforth anchors may not set correctly.

It is not necessary to use a chain with Chene Style Anchors.  Navy style, Mushroom, River, and Richter anchors may benefit from the use of anchor chain but will also work without.

 

How much Anchor Line do I need? A Ratio of 5:1 is considered to be the minimum scope for most anchors. This means that for every foot of water depth, 5 feet of line is required. For example: to anchor in 30 feet of water, 150 feet of line is required. This is a important aspect of anchoring to remember. If the anchor line is too short the anchor may fail to set or break free easily. The Chene and Richter anchors we carry are exempt from this requirement

 

What style of anchor is best for my boat? The style of anchor used is as much personal preference as it is science. Each anchor on the market has advantages and disadvantages.  Please see each item description for specific advantages to each anchor design and recommended anchoring conditions.

 

Should I use a Solid Stock or Slip Ring Design? If you have decided to use a Danforth Style anchor then you need to decide if you want a Solid Stock or Slip Ring design. The anchors holding power will be the same for both designs. A Solid Stock anchor will be slightly less susceptible to damage due to its solid steel stock. The Slip Ring style offers easier retrieval  when used in rocks and other easy snag bottom conditions

 

Is this anchor protected against corrosion? Yes, All of the anchors we sell are protected against corrosion. Each manufacturer uses different types of coatings so please see each item description for the type of coating used.

 

Is this anchor made in the USA? We strive to carry as many American Made Products as possible and many of our anchors are made in the USA. Every item that is made in America will display ‘’ Proudly Made in the USA’’ in the item description

 

Why is the shipping cost so high? We only charge actual UPS shipping cost and do not profit from shipping. Unfortunately, due to the size and weight of some anchors shipping can be expensive. We always combine shipping on items when possible.

 

 

Important Note: These answers should be used as general guidelines only and should not be substituted for Professional Advice. We have no way of foreseeing every condition these anchors may be used in. If you are not confident in which anchor you require, we recommend contacting your boat’s manufacturer or local authorities to get information on any specific conditions unique to your application. All item images and item descriptions on this listing are property of Underwoods Auto & Marine LLC and are not to be used, copied, or otherwise reproduced without written permission. The Term ‘’Danforth’’ is property of Tie Down Engineering. The Term ''Richter'' and the Richter Design are property of Greenfield Products Inc.

 


Powered by eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.

Subaru BRZ: Increased supply for UK market

Wed, 31 Jul 2013

There will be more Subaru BRZs (pictured) in the UK The Toyota GT86, and it’s Subaru BRZ sibling, have been a big hit in the UK, and around the world, with lovers of (almost affordable) sports cars that aren’t overloaded by tech and weight. But until now the BRZ version of the Japanese sports car has been in reactively short supply as Toyota takes the vast majority of production to fill its customers needs, but for those who’d prefer to take the slightly left-field BRZ route, there’s good news. Subaru has announced that they are increasing the supply of BRZs in to the UK market which means car buyers with a hankering should now be able to get a new BRZ in 2-6 weeks (depending on spec and colour).

Land Rover Range_e – Hybrid test-bed

Fri, 14 May 2010

The Range Rover Sport based Land Rover Range_e Pragmatically, Land Rover are working hard to change the world’s perception of its products by shouting as loudly as they can about the ‘Green’ credentials they have, from off-setting carbon emissions to 45k miles on every car they sell to adding stop-start to the Freelander 2. But long-term Land Rover are looking to introduce new, lightweight cars in 2012/2013 with the same aluminium underpinnings as Jaguar, and introducing some hybrid technology on the way. With that in mind they’ve put together a Range Rover Sport based Range_e to trial the tech ahead of its use in the next generation of Land Rover’s cars and are planning on running five cars as test-beds this year.

Vauxhall / Opel can’t sell to the U.S.

Wed, 03 Jun 2009

Vauxhall Insignia VXR Sports Tourer won't go on sale in the US Probably the most significant thing so far is that Opel and Vauxhall will not be allowed to sell cars in the US, or indeed in to China. Which does cut out a lot of potential, if not exactly a lot of current, sales possibilities. It makes sense for GM to have made this clause in the sale agreement, but it will hurt the new Magna owned group in the long run.