Most Ipod Iphone Mp3 Aux Adaptor Mercedes Audi Porsche Bmw on 2040-parts.com
Saint-Peterburg, default, Russian Federation
USB
interface adapter MOST 1. Opportunities and features. ·
For
vehicles ~ 2002 ÷ 2010 with interface
MOST: 1.
Audi
(A6, A8, Q7) 2.
BMW
(E60, E70, E90, etc.) 3.
Mercedes
Benz (with NTG2.0 - W164, W211, etc.) 4.
Porsche
(with or PCM2.0 PCM2.1) ·
playing
MP3 files from USB-flash drives; ·
managing
files and folders by using the head unit and on the steering wheel. ·
maximum
number of folders - 6 (12 - for BMW with iDrive and activated support «MP3
Retrofit»), maximum number of tracks in a folder - 99. ·
support
joint work with the standard CD-drive; ·
allowed
random folder and file names, as well as the presence of non-music files and
folders; ·
Displays
the number of files and folders, as well as their names (if supported head unit); ·
remembers
the exact playback position on a flash drive during system shutdown or when
removing flash drive; ·
additional
port to connect AUX, iPod / iPhone / iPad, module Bluetooth (through the
appropriate accessory). ·
as
well as the ability to customize, quick start mode, Random, a simple algorithm
of update. 2. Short description. Adapter is
designed to reproduce the standard car audio sound with Flash USB-stick
(hereinafter - the stick), as well as the use of accessories, with various
external audio sources. In the audio system it is connected to the optical
interface MOST, emulates the regular CD-drive and provides additional features.
To him available 6 folder in the root of stick and up to 99 mp3-files in each
folder. The files in the root of the stick are considered located in a folder
named "Root". Allowable
stick file system - FAT16 or FAT32. If the flash drive is not connected or it
is NTFS or it does not read MP3 files, the adapter is completely disconnected
from the interface MOST (becomes invisible). Thus, for listening to an extra
port external audio sources (AUX, iPod, Bluetooth), USB flash drive must be
connected to the adapter and It should be at least one mp3-file !!! Adapter can
operate together as with the standard CD-ROM drive, and without it. The user
can independently (without dismantling) to upgrade the firmware of the adapter
with USB-flash drive. Scope of supply: ·
Adapter (90 * 60 * 25mm); ·
Extension
Cable USB (1.5 m); ·
Power
cable (0.4m); ·
Optical
cable with connector (0.8m); ·
Jumper
(Jumper) - 2 pcs .; Adapter connectors: 1) power
connector; 2)
connector MOST (with cap); 3)
secondary audio; 4) area for
jumpers;
5)
connector USB- "mom" 3. Connecting of the adapter If your
vehicle has no optical wiring (in complete sets, where in addition to the head
unit no blocks with optics - is found mainly in the MB W211 with head unit
Audio 20CD), then the connection will require additional optical thread with
connector (not included) and optics activation (via diagnosis). For BMW: ·
If
your car has no regular CD-drive - head unit must be programmed to work with
him (with the diagnostic equipment). ·
If
your car has no regular CD-drive - head unit must be programmed to work with
him (with the diagnostic equipment). ·
If
set DVD-ROM drive for 6 CDs, work of adapter can not be guaranteed because not
known - whether it is possible coding the head unit simultaneous operation and
CD- and DVD-changer.
1) On the
main case of the adapter is a platform for jumpers. They must be set by select
a vehicle before adapter connection (picture 2). Only for
radio Comand APS NTG2 (MB W211 till 2009) in order to maintain regular CD-drive
is required to install two jumpers in the vertical position (parallel to
USB-connector). Audio recorder for 20cc (MB W211 till 2009) requires the
installation of two jumpers in the horizontal position. 2) Connect
the power cable of adapter to the electrical wiring of the car: the black wire
- GND (ground), red wire - BATT (+ 12V, DC). 3) If a
regular CD-ROM drive (CDC) do not need it do not install, adapter can be
connected to any point of the interface. CDC if you want to save, then you need
to connect the adapter: ·
In
the Audi (MMI High color) to anywhere in the interface. ·
In
the Audi (MMI Basic Monochrome) immediately before the CDC. ·
In
the BMW between the head unit and the CDC before CDC. In some cases - after the
CDC. ·
In
the Mercedes and Porsche between the head unit and the CDC before CDC. Thus it is
necessary to connect the optical thread with connectors so that the optical
signal is propagated from the head unit to the adapter Skif, from the adapter
to the CD-drive from the CD-drive further into the ring MOST. The direction of
the optical signal shown by the arrows on the connector. You may need to
disassemble the optical connector to rearrange opto thread and set the
different direction of signal. Disassembly of various type connectors is the same.
It is necessary to remove the outer part (step 1 and 2), pull on the half blue
retainer (step 3) and release the opto thread, slightly tilting the latch (step
4). Assemble in reverse order. How to disassemble optical connector: Note:
Arrows on
the connectors indicate the direction of the optical signal. 4. Joint work of regular CD-drive (CDC) and the
adapter
5. Work of adapter. Mode additional port (AUX,
iPod, Bluetooth) USB mode is
equivalent to mode CDC. Folders on flash match disks, and files - tracks. All
functions of CDC are applicable to adapter - rewind within a track, shuffle
(Random), Repeat (Repeat), scanning (Scan). Maximum number of files in a folder
- 99, the number of folders - 6 (some BMW supported by work with 12 folders).
For BMW
with iDrive and activated support of «MP3 Retrofit» (by navigating directories
of the USB stick) to switch between AUX and USB use virtual directory names AUX
and USB, respectively. If the head
unit supports CD-text, then displays the names of files and folders (except for
BMW E65). Text strings of the folder and file names are limited to 16
characters in length. Folders that have no mp3-files do not interfere with
operation of the device.
In AUX
mode, adapter transmits the audio signal from an external source into the factory
system. If the adapter connected via a special adapter for Player iPod (iPhone
or iPad), then will be provides charging and automatic on / off play on this
unit. In addition, buttons of Disk Management "3" and "1"
can be switched back and forth playlists, respectively, and by tracks control
buttons can be switched tracks on the player. Also in this mode, the function
"Scan" and fast forward and backward. Player iPod (iPhone, iPad)
turned on to "dock station" mode in which the device is locked (display
and controls are functioning properly), but in this mode, the current status of
the player is not available for adapter, and output to the display of the head
unit status information of the player does not match its actual state. |
Interconnects for Sale
- Bmw bm54 e39 e46 e38 e53 x5 aux in adapter kabel radio navi cd mp3 iphone klinke(US $8.55)
- Car aux-in adapter usb cable fit for bmw 3 series x5 x6 z series e91 e88 e90 e92(US $8.55)
- 2m usb 2.0 & 3.5 mm 1/8 car dashboard flush mount audio aux extension cable lead(US $13.99)
- Rf standard signal cable .2m(US $12.00)
- Kicker qi25 5 meters (16.5 ft) 2-channel q-series rca audio interconnect cable(US $44.95)
- Nvx xix2f 2-pack of 1 male to 2 female y-adapter rca audio interconnect cables(US $21.99)
Mini Crossover Concept: the first photos
Tue, 09 Sep 2008By Tim Pollard First Official Pictures 09 September 2008 23:00 Here's the first look at the new Mini Crossover Concept – proof, at last, that BMW will indeed build a 4x4, SUV-lite version of the Mini. The Crossover concept car will be shown at the 2008 Paris motor show (where else?) and previews the production Mini SUV due in 2010. Mini Crossover Concept: the first official pictures Pore over these first official photographs carefully, because the new Mini Crossover Concept shows closely how the trendy brand's new SUV is shaping up and also reveals how the future face of the Mini brand is evolving.
Volkswagen reveals e-Golf and e-Up! before Frankfurt motor show debut
Tue, 27 Aug 2013Volkswagen has just released details on the e-Golf and e-Up! before their 2013 Frankfurt motor show debuts. The two cars are essentially pre-production examples of pure-electric vehicles that VW will start building just a short time from now.
Mercedes-Benz reveals first C-class details
Mon, 21 Oct 2013Mercedes-Benz has revealed limited details about its new fourth-generation C-class sedan, more than two months before it is due to make its world debut at the Detroit auto show. Although the new BMW 3-series and Audi A4 rival is yet to official unveiled -- in fact, all we have so far are interior renderings -- Mercedes-Benz says the new C-class will be a significantly more advanced car than its predecessor in terms of construction, with a “best in class” weight figure and a level of structural integrity that it describes as being “unparalleled” in its class. Among its features is a new lightweight body structure that uses a newly developed aluminum hybrid construction process that Mercedes-Benz claims will shave as much as 220 pounds over the current model depending on the engine it uses.