Find or Sell any Parts for Your Vehicle in USA

Rv, Trailer, Camper, Motorhome Large Vinyl Decals/graphics Kit-k-0003 on 2040-parts.com

US $199.99
Location:

Hillsdale, Michigan, United States

Hillsdale, Michigan, United States
Condition:New Brand:graphics-kit Finish:Glossy Type:Body Decal, Hood Decal, Racing Stripes Placement on Vehicle:Left, Right, Front, Rear Theme:Custom Image Warranty:No Manufacturer Part Number:k-0003 Country/Region of Manufacture:United States Primary Color:multi UPC:Does not apply

DESCRIPTION 
Universal Rv, trailer, motorhome, camper graphics kit- K-0003

FEATURES

Kits includes 16 graphics rights and lefts for both sides, graphics will be shipped on two backing sheets ready to cut for custom placement as you choose with clear application tape for easy placement. These kits are made for you to customize your RVs, trailers, campers, and vehicles. Can be applied to any non-porous surface.
These Graphics are a mirror image for the right side and left side. 
We use original equipment grade materials in making our graphics so you receive an exceptional product. All graphics are printed on high quality outdoor self-adhesive vinyl and UV laminated to protect against fading, if properly installed graphics may last up to 7 years.
We can customize these kits to any alternate sizes and colors, please contact us if you need a custom size or color kit.

PACKAGES INCLUDE:
2- 32" width x 4.6" height 
2- 104" width x 9.1" height 
2- 66.4" width x 3.7" height 
2- 89" width x 2.4" height 
2- 25" width x 4.5" height 
2- 81" width x 4.6" height 
2- 49" width x 9.5" height 
2- 22" width x 15" height 
(Measurements are at the thickest point of the decal, measurements are also displayed in photos.)
Application instructions.
Free Application tool (vinyl squeegee).

ORDERING:
Please message us at checkout with your color choice from pictures available,
Kit Colors Available in:

BLUE/GREY/BLACK/WHITE
BURGUNDY/GREY/BLACK/WHITE
BLACK/GREY/WHITE
FOREST GREEN/BLACK/GREY/WHITE
RED/GREY/BLACK/WHITE

Note: Settings on monitors, devices etc can vary from one to another and colors and sample pictures shown on our products are representative of the actual colors we use.

MATERIALS NEEDED
Small cutting knife or razor blade (an Exacto Knife is ideal for the job)
Masking tape
Lint free dry cloth
Plastic Squeegee (included)

SURFACE PREP
Warning: Do not use any aromatic solvents such as acetone, M.E.K., toluene, paint thinner, lacquer thinner, gasoline or ammonia-based cleaners to clean the surface area.
Saturate a clean cloth with isopropyl alcohol and wipe the surface where the vinyl is to be applied to remove any contaminates such as silicone, wax, or adhesives. Thoroughly dry the surface area with a lint free dry cloth.
Temperatures of 50º to 90º F, with 70° to 80°F being the optimum range make sure surface area is not too hot or cold prior to applying.

APPLICATION
Unroll and Burnish your decals
Lay your Vinyl Decals on a smooth, hard surface such as a tabletop, wall, or floor. Use a squeegee (application tool) to burnish the transfer tape to the vinyl graphic by rubbing over it with a very hard pressure. Now, flip it over and repeat on the back side. This will adhere the Transfer Tape to the Vinyl Decal well so that the backing paper will remove more easily.

Position and Secure
Eyeball where you want to place your vinyl Decal, or use a measuring tape to determine the correct position. Use painter's tape to tack the vinyl decal in place on the top corners or center of decal. If required, use a bubble level to check that the design is level by placing it on the 1/8" trim line that surrounds your decal. Adjust as necessary. once you have your Vinyl Decal installed on your surface you will not be able to move it to another position, so take the time to double check that your design is level and EXACTLY where you want it to stay!

Flip, Remove, and Roll
Flip the decal up on one end (like opening a door) and carefully peel the Backing Paper off from the hinged edge. Pull the Backing Paper back slowly at a 180-degree angle, using the flat of your hand to push the vinyl down onto the Transfer Tape as you slide the Backing Paper off. Avoid touching the adhesive on the Vinyl Decal if you can. If the decal wants to come with the Backing Paper, simply roll backward a bit and push the decal back down onto the Transfer Tape using the flat edge of your fingers while you pull back.

Once the Backing Paper is removed, slowly roll the Vinyl Decal down on the surface from the hinged edge. Use the Squeegee or the palm of your hand to smooth and secure the decal from the center outward.

Burnish and Peel
Use the squeegee to burnish the Vinyl Decal securely to the surface with the Transfer Tape still in place. Slowly peel back the Transfer Tape form the top down or from the end to center, again at a 180-degree angle, taking care that the Vinyl Decal stays securely on the surface. Once the transfer tape is removed you can squeegee the stripe or decal with the felt end of the squeegee so not to scratch the decal. Air bubbles can be removed with a puncture tool . Lightly spray the graphics with soap and water and clean remove fingerprints with lint free dry cloth.

PAYMENT

We accept payment by PayPal.
Immediate payment is required.
For customers in Michigan(MI), applicable 6% sales tax will be applied during checkout.

SHIPPING

Due to being made to order please allow 2-3 days processing time.
All orders will be shipped USPS priority mail with Tracking 
We only ship to confirmed addresses 
Custom or changes in orders will require 5 days handling time
Please make sure you provide the correct address we will not refund for incorrect address at the time of purchase 

RETURNS

We are sorry due to this being a custom package we do not offer returns.
We do not except returns on international orders

Our customer support team is available through eBay messages only
Please ask all questions prior to purchasing 

Graphics Decals for Sale

New Jaguar XE will get the V6 engine from the F-Type

Wed, 02 Apr 2014

The new Jaguar XE (pictured) will get the F-Type’s V6 We’re expecting the Jaguar XE – Jaguar’s new smaller saloon aimed at the BMW 3-Series – to arrive at the Paris Motor Show in September before going on sale in 2015 after Jaguar revealed the first official details on the XE at the Geneva Motor Show this month. Jaguar were a little vague on detail, although they did confirm the XE would come with aluminium underpinnings – a first for the sector and to be shared with the new Jaguar SUV when that arrives – and offer Jaguar’s new range of 4-cylinder diesel and petrol engines. But what Jaguar also said is that there will be a range-topping XE capable of 186 mph, which seemed a bit of a stretch for a 4-cylinder engine, however good.

The fall and rise of the budget car

Fri, 06 Sep 2013

Twenty years ago, the classic bargain brands like Lada seemed to be going the same way as the Soviet empire that spawned them. Woefully dated and badly made, only a weirdo would have bought a new Lada rather than a second-hand model from Ford, Vauxhall or VW. However, one of the big trends in the car industry today is the re-emergence of bargain cars.

Mercedes E63 AMG Estate (Wagon) in the hands of Susie Stoddart

Thu, 10 Jun 2010

Susie Stoddart at the wheel of the Mercedes E63 AMG Unless you follow DTM racing (German Touring Cars) you may not of heard of Susie Stoddart. Unless you followed Formula Renault 8 or 9 years ago. Or Formula 3 in 2005.